How to Use a Jiffy Wicker When Wicking a Candle Discuss these topics on the Message Boards Copyright © 2003-2004 CandleHelp.com Continued From Page One (click here to see the first page) Removing the Jiffy Wicker To remove the candle from the mold, you will need to un-do the jiffy wicker. To do this, pull on the slip knot on the bottom of the mold, beneath the jiffy wicker metal washer and rubber washer. The knot should pull out of the wick. Slip the metal washer and the rubber gasket off of the wick. Next, untie the wick at the top of the candle from the jiffy wicker bar, and slide the jiffy wicker bar off of the wick. Now your candle is free at both ends, and is un-Jiffy Wicked. After you have removed the jiffy wicker from both ends of the candle, you can remove it from the mold. Jiffy Wicker Refills You can buy jiffy wicker refills which include just the rubber gaskets and metal washers, which wear out faster than the wicker bars.

See Also Wicks Bulk Wick Pre-Tabbed Wick Wick Tabs & Clips Candle Holders Candle Kits Candle Accessories Candle Holders Sculpture Candles Vigil Candles Wedding Candles Wedding Candles Floating Candles Birthday Candles Candle Making Supplies Link To This Site Links To Other Sites Interesting Products Jiffy Wicker

Conditions of Use
You use this site and the information on it completely at your own risk. It is your responsibility to verify all information on this site before using it. Any advice, recommendation, tip, tool, guide, tutorial or suggestion may be subject to error or omission. You understand that all information is provided without express or implied warranties. The staff of CandleGoodies.com can not be held liable for incidental, consequential or indirect damages resulting from your use of this site or the use of information contained on the site.